ASSESSMENT OF SURFACE DETAILS REPRODUCTION & DIMENSIONAL ACCURACY OF GYPSUM MODELS RETRIEVED FROM VINYL SILOXANE ETHER IMPRESSIONS AFTER THEIR DISINFECTION
DOI:
https://doi.org/10.33279/jkcd.v14i2.723Abstract
Objectives: This study aims to investigate the surface details reproduction and dimensional accuracy of gypsum models retrieved from vinyl siloxane ether impression material after treatment with various modes of disinfection of the impression material.
Materials and Methods: An observational study was carried out on a total number of 54 vinyl siloxane ether impressions that were subjected to three diff erent modes of disinfection i.e 3 % of Didecyldimethylammonium chloride , submersion in 2 % Glutaraldehyde solution for around 10 minutes and microwave disinfection for 8 minutes .The data analysis was done using , the paired-samples T-Test for the diff erence in dimensional change between pre and post-treatment of groups, for intergroup comparison, the One-Way ANOVA was used, SPSS version 21 .Numerical data was displayed in form of tables and charts.
Results: There was no diff erence between the surface detail reproduction of gypsum models among
the three diff erent methods of disinfection of the vinyl siloxane ether impression as there was 100 % surface detail reproduction in all 3 groups. A signifi cant diff erence in dimensional accuracy was detected in the gypsum models poured of vinyl siloxane ether treated with microwave disinfection (p<0.001 ) and no signifi cant change was recorded in the dimensional accuracy of groups treated with 3 % Didecyldimethylammonium chloride and submersion in 2 % Glutaraldehyde solution for10 minutes.
Conclusion: Microwave disinfection had a remarkable impact on the dimensional accuracy of gypsum models so it should be used with care.
References
Martins F, Reis J, Barbero Navarro I, Maurício P. Dimensional Stability of a Preliminary Vinyl Polysiloxane Impression Material. Dent J. 2019 Aug 1;7(3):81. DOI:10.3390/dj7030081
Sharif RA, Abdelaziz KM, Alshahrani NM, Almutairi FS, Alaseri MA, Abouzeid HL, et al. The accuracy of gypsum casts obtained from the disinfected extended-pour alginate impressions through prolonged storage times. BMC Oral Health. 2021 Dec;21(1):296. DOI:10.1186/s12903-021-01649-2
Khatri M, Mantri SS, Deogade SC, Bhasin A, Mantri S, Khatri N, et al. Eff ect of chemical disinfection on surface detail reproduction and dimensional stability of a new vinyl polyether silicone elastomeric impression material. Contemp Clin Dent. 2020 Jan-Mar;11(1):10-14. doi:10.4103/ccd.ccd_9_19.
Awod Bin Hassan S, Ali F Alshadidi A, Ibrahim N Aldosari L, Heboyan A, S Saini R. Eff ect of chemical disinfection on the dimensional stability of polyvinyl ether siloxane impression material: a systemic review and meta-analysis. BMC Oral Health. 2023 Jul 10;23(1):471.DOI: 10.1186/s12903-023-03168-8
Amin W, Al-Ali M, Al-Tarawneh S, Taha S, Saleh M, Erefi j N. The eff ects of disinfectants on dimensional accuracy and surface quality of impression materials and gypsum casts. J Clin Med Res [Internet]. 2009 [cited 2024 Jun 1]; Available from:https://www.jocmr.org/index.php/JOCMR/article/view/68. doi: 10.4021/jocmr2009.04.1235.
Kumar RN, Reddy SM, Karthigeyan S, Punithavathy R, Karthik KS, Manikandan R. The eff ect of repeated immersion of gypsum cast in sodium hypochlorite and glutaraldehyde on its physical properties: an in vitro study. J Pharm Bioallied Sci. 2012 Aug;4(Suppl 2) doi: 10.4103/0975-7406.100270.
Shah R, Collins JM, Hodge TM, Laing ER. A national study of cross infection control: “are we clean enough?” Br Dent J. 2009 Sep;207(6):267–74. DOI: 10.1038/ sj.bdj.2009.824
Anaraki MR, Lotfi pour F, Moslehifard E, Momtaheni A, Sigari P. Eff ect of diff erent energy levels of microwave on disinfection of dental stone casts. Journal of dental research, dental clinics, dental prospects. 2013;7(3):140.DOI: 10.5681/JODDD.2013.022
Reddy SM, Vijitha D, Karthikeyan S, Balasubramanian R, Satish A. Evaluation of dimensional stability and accuracy of autoclavable polyvinyl siloxane impression material. The Journal of Indian Prosthodontic Society. 2013 Dec;13:546-50. DOI: 10.1007/s13191-012-0168-z
Pal PK, Kamble SS, Chaurasia RR, Chaurasia VR, Tiwari S, Bansal D. Evaluation of diff erent disinfactants on dimensional accuracy and surface quality of type IV gypsum casts retrieved from elastomeric impression materials. Journal of International Oral Health: JIOH. 2014 Jun;6(3):77. DOI: Not available, PMID: 25083038 PMCID: PMC4109252
Aivatzidou K, Kamalakidis SN, Emmanouil I, Michalakis K, Pissiotis AL. Comparative study of dimensional stability and detail reproduction of reformulated and nonreformulated elastomeric impression materials. Journal of Prosthodontics. 2021 Apr;30(4):345-50. DOI: 10.1111/jopr.13248
Naumovski B, Kapushevska B. Dimensional stability and accuracy of silicone–based impression materials using diff erent impression techniques–a literature review. Prilozi. 2017 Sep 1;38(2):131-8. DOI: 10.1515/prilozi-2017-0031
Cho SH, Schaefer O, Thompson GA, Guentsch A. Comparison of accuracy and reproducibility of casts made by digital and conventional methods. The Journal of prosthetic dentistry. 2015 Apr 1;113(4):310-5. DOI: 10.1016/j.prosdent.2014.09.027
Maluly-Proni AT, Delben JA, Briso AL, Marson FC, Dos Santos PH. Evaluation of material waste, dimensional stability, and detail reproduction of polyvinyl siloxane impression materials mixed with different mixing tips. The Journal of Prosthetic Dentistry. 2022 May 1;127(5):759-64.
DOI: 10.1016/j.prosdent.2020.11.024
Nassar U, Chow AK. Surface detail reproduction and effect of disinfectant and long‐term storage on the dimensional stability of a novel vinyl polyether silicone impression material. Journal of Prosthodontics. 2015 Aug;24(6):494-8. DOI: 10.1111/jopr.12244
Lucas MG, Arioli‐Filho JN, Nogueira SS, Batista AU, Pereira RD. Eff ect of incorporation of disinfectant solutions on setting time, linear dimensional stability, and detail reproduction in dental stone casts. Journal of Prosthodontics: Implant, Esthetic and Reconstructive Dentistry. 2009 Aug;18(6):521-6. DOI: 10.1111/j.1532-849X.2009.00466.x
Meghashri K, Kumar P, Prasad DK, Hegde R. Evaluation and comparison of high-level microwave oven disinfection with chemical disinfection of dental gypsum casts. Journal of International Oral Health: JIOH. 2014 Jun;6(3):56. DOI: Not available PMID: 25083033PMCID: PMC4109246
Schleier PE, Gardner FM, Nelson SK, Pashley DH. The eff ect of storage time on the accuracy and dimensional stability of reversible hydrocolloid impression material. The Journal of prosthetic dentistry. 2001 Sep 1;86(3):244-50. DOI: 10.1067/mpr.2001.117758
AlZain S. Eff ect of chemical, microwave irradiation, steam autoclave, ultraviolet light radiation, ozone and electrolyzed oxidizing water disinfection on properties of impression materials: A systematic review and meta-analysis study. The Saudi dental journal. 2020 May 1;32(4):161-70. DOI: 10.1016/j.sdentj.2019.12.003
Shetty RM, Bhandari GR, Mehta D. Vinyl polysiloxane ether: a breakthrough in elastomeric impression material. World J Dent. 2014 Apr;5(2):134-7. DOI: 10.5005/ jp-journals-10015-1274
Thota KK, Jasthi S, Ravuri R, Tella S. A comparative evaluation of the dimensional stability of three diff erent elastomeric impression materials after autoclaving–an invitro study. Journal of Clinical and Diagnostic Research: JCDR. 2014 Oct;8(10):ZC48. DOI: 10.7860/ JCDR/2014/9768.5036
Revised American Dental Association Specifi cation No. 19 for Non-Aqueous, Elastomeric Dental Impression Materials. J Am Dent Assoc. 1977 Apr;94(4):733–41.DOI: 10.14219/jada.archive.1977.0334
Owen CP. An investigation into the compatibility of some irreversible hydrocolloid impression materials and dental gypsum products: Part II. A refi ned discriminatory procedure. Journal of Oral Rehabilitation. 1986 Mar;13(2):147-62. DOI: 10.1111/j.1365-2842.1986.tb00647.x
Kohn WG, Harte JA, Malvitz DM, Collins AS, Cleveland JL, Eklund KJ. Cover story guidelines for infection control in dental health care settings—2003. The Journal of the American dental association. 2004 Jan 1;135(1):33-47. DOI: 10.14219/jada.archive.2004.0019
Ali KS, Shenoy VK, Rodrigues SJ. Comparative evaluation of dimensional accuracy of casts made by repeated pouring of addition siliconeimpressions using 1) Twostep putty/light-body technique using stock tray and 2) One-step simultaneousdual viscosity technique using custom tray: An in vitro study. J Nepal Dent Assoc. 2010 Jan;11(1):32-9. DOI: Not available
Drennon DG, Johnson GH. The eff ect of immersion disinfection of elastomeric impressions on the surface detail reproduction of improved gypsum casts. The Journal of Prosthetic Dentistry. 1990 Feb 1;63(2):233-41. DOI: 10.1016/0022-3913(90)90111-O
Abdullah MA. Surface detail, compressive strength, and dimensional accuracy of gypsum casts after repeated immersion in hypochlorite solution. The Journal of prosthetic dentistry. 2006 Jun 1;95(6):462-8. DOI:10.1016/j.prosdent.2006.03.019
R Mohd N, Omar RA, Etajuri EA. Dimensional stability of elastomeric impression material after disinfection via immersion and microwave irradiation. The Open Dentistry Journal. 2021 Dec 22;15(1). DOI:10.2174/1874210602115010658
Council on Dental Materials and Devices. Revised American Dental Association specifi cation No. 19 for non-aqueous, elastomeric dental impression materials. The Journal of the American Dental Association. 1977 Apr 1;94(4):733-41.
Lepe X, Johnson GH. Accuracy of polyether and addition silicone after long-term immersion disinfection. The Journal of prosthetic dentistry. 1997 Sep 1;78(3):245-9. https://doi.org/10.1016/S0022-3913(97)70021-0
Mushtaq MA, Khan MW. An Overview of Dental Impression Disinfection Techniques-A Literature Review. Journal of the Pakistan Dental Association. 2018 Oct 1;27(4). Doi: https://doi.org/10.25301/JPDA.274.207
Kamble SS, Khandeparker RV, Somasundaram P, Raghav S, Babaji RP, Varghese TJ. Comparative evaluation of dimensional accuracy of elastomeric impression materials when treated with autoclave, microwave, and chemical disinfection. Journal of international oral health: JIOH. 2015 Sep;7(9):22.
Ahmed A. Effi cacy of microwave disinfection and its effect on dimensional stability of polyether impression material.
Precautions MS, Flush AC. Guideline for Disinfection and Sterilization in Healthcare Facilities, 2008.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Manail Asif, Aiman khan, Sahibzada Ammar Ahmad, Munazzah Ejaz, Hafsa Rehman, Amna Amjad
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
You are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- NonCommercial — You may not use the material for commercial purposes .
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
